Catching up on some smaller projects

It has been a while, with the exception of the most recent post, that I have added to this blog.  I have done this or that for people...some simply not worthy of posting.  Worthy in the fact that I helped out others with my shop and my skills, but not worthy of taking note of due to the fact it was mundane and just not noteworthy.  However, here are a few that I have done in the shop and mostly because it offered me the chance of showing my wife Karen some different woodworking techniques.  This first one was the suggestion of Karen.  This television was relatively new to our bedroom and we like to lay in bed to watch tv at the end of the day.  Well, Karen decided that the tv needed elevating to facilitate easier tv viewing.  I saw the possibility of storage for the remotes associated with the tv...the DirecTV remote and the remote for the DVD player.  So....I rolled the design around in my head for a few days before we began to fabricate the parts needed.  This was one of the first projects that Karen joined me in the shop for...so just about everything associated with this project was new and a learning experience for her.  I have to say...now that it is built and in service...it definitely makes laying in bed and watching tv a little more of a pleasure.

  The next project I would like to detail is this beautiful picture frame I made from walnut and yellowheart.  Some left over yellowheart from a former project that I was contracted to build, allowed me to incorporate it into this beautiful frame for some artwork from my wifes past.  Quite simple design that actually used the inner walnut piece of the frame to hold the glass, picture, and everything else involved inside of the frame.  The yellowheart face of the frame is only maybe a quarter inch thick and laminated to some simple and soft pine.  This allowed a small amount of the more expensive and exotic wood to be used and the soft pine allowed easy penetration of the push points that holds everything in place once placed inside of the frame.

 Just below that frame is an addition that my wife Karen loves.  This came about because of the remodel of our bathroom just to the left of this cabinet.  Due to new cabinetry for the bathroom, we lost a little bit of storage for bathroom related items.  This cabinet was designed to take up that need and sort of play off of a floor to ceiling storage cabinet on the other side of the bathroom door.

Made from simple pine...it was basic construction with frame and raised panel construction of the doors.  I added the fancy rail up top because it dressed it up and I had it laying around the shop for years from some other work. 







  The last thing I wanted to get up posted was this simple little childrens table.  I was first contacted by a friend to ask if I could repair some lamination defects in one or two the chairs shown with the table. 

  As I was completing those repairs...the subject of a round table came up and I was open to the project as it wouldn't take all that long to fabricate.  Again, simple pine and I was to take it to this point.  No finish as the customer was going to prime and paint it once it was delivered.  The main reason why I was open to building this table was because a number of months ago...I had fabricated a large router jig that would allow me to attach my router to it and turn out perfect circles in wood up to like six feet in diameter down to something around fifteen inches in diameter.  So, this was the perfect opportunity to give that jig a whirl and it worked beautifully.